AHLBORN

admin

点击进入 AHLBORN官网






欢迎来到AHLBORN！

探索AHLBORN测量仪器，数据记录器和传感器的世界！

数据记录仪ALMEMO®

ALMEMO®意味着一个用于所有测量的数据记录器-仅需要更换传感器。连接传感器后，每台ALMEMO®测量仪器或数据记录仪都会自动指示测量范围和测量值。更换传感器后，无需在仪器上进行任何设置。随后将自动识别所有随后连接的传感器，并且显示屏上会立即显示测量值。即使在测量过程中，也可以根据需要更换传感器。也可以将校准值存储在ALMEMO®连接器的存储芯片中。因此可以以最高的精度执行后续的测量操作。

数位感测器

ALMEMO®D7技术可实现传感器信号的数字化。优点：如果需要，可以在不丢失校准数据的情况下更换数字传感器，因为数字传感器的校准无需测量设备即可进行。各个传感器参数也存储在连接器中。也可以自由选择评论。在设备的显示中，扩展范围是可能的。每个D7连接器具有10个测量量，即使使用其他制造商的传感器，简单的数据记录器也将成为多功能测量仪器。利用并数字化您的传感器！

WinControl软件

测量仪器必须能够与其环境相互影响。 WinControl是用于监视，评估和系统集成的软件。适用于所有ALMEMO®测量仪器和数据记录仪。

Ahlborn Mess- und Regelungstechnik GmbH

在慕尼黑以南的石灰岩阿尔卑斯山脚下的人们度假的地方，由家族经营的ALMEMO®公司开发和制造高质量的测量技术，用于研究，工业，环境保护，建筑翻新和许多其他领域。更多的。电子产品的大部分生产在ALMEMO®位于图林根州伊尔默瑙的分支机构中。ALMEMO®公司配备了最先进的生产技术。 AHLBORN Mess und Regelungstechnik GmbH的所有产品均带有“德国制造”标签。

受过良好教育的人

ALMEMO每个员工都受过良好的教育和激励。基本要求是高度的个人责任感和具有社会结构的愉快工作氛围。 AHLBORN Mess- und Regelungstechnik GmbH的每位员工都会获得公司利润的参与份额。

测量技术的发展

自20多年来以来，ALMEMO一直在使用用于传感器的智能连接插头。这意味着一台测量仪器能够运行完全不同的应用程序–仅需要更换传感器。这样，无需进行大量编程。连接相应的传感器后，即可立即开始测量操作。

DAkkS-校准实验室D-K-19342-01-00

为了能够为ALMEMO®测量技术可以获取的所有测量量提供接近完整的校准范围，ALMEMO设有校准实验室。关于测得的空气温度，空气湿度，风速和电气尺寸，我们根据标准DIN EN ISO / IEC 17025：2018获得认可。


Welcome at AHLBORN !

Discover the world of AHLBORN measuring instruments, data logger and sensors !

Data logger ALMEMO®

ALMEMO® means one data logger for all measurement - only the sensor needs to be changed. As soon as a sensor is connected, each ALMEMO® measuring instrument or data logger automatically indicates the measuring range and the measured value. When the sensor is changed, no setting is required on the instrument. Any sensor subsequently connected is recognized automatically and the measured value is indicated immediately on the display. Sensors can be changed as and when necessary - even in the course of a measuring operation. It is also possible to store calibration values in the memory chip in the ALMEMO® connector. Subsequent measuring operations can thus be performed with the highest accuracy.

Digital sensors

The ALMEMO® D7 technology allows the DIGITIZATION OF SENSOR SIGNALS. The advantage: If required, digital sensors can be exchanged without loosing the calibration data since the calibration of a digital sensor takes place without a measuring device. Individual sensor parameters are also stored in the connector. Also freely selectable comments can be deposited. In the displays of the devices extended ranges are possible. With 10 measured quantities per D7 connector, simple data loggers become multifunction measuring instruments, even with sensors from other manufacturers. Take advantage and digitize your sensors!

WinControl software

Measuring instruments must be able to interconect with their environment. WinControl is the software for monitoring, evaluation and system integration. For all ALMEMO® measuring instruments and data loggers.

Ahlborn Mess- und Regelungstechnik GmbH

In the region south of Munich, at the foot of the Northern Limestone Alps, a place where other people go on holiday, we develop and manufacture in our family run company high quality measuring technology for research, industry, environmental protection, building renovation and much more. The bigger part of the electronics production takes place in our branch in Ilmenau in Thuringia. The company is equipped with state-of-the-art production technology. All products of AHLBORN Mess- und Regelungstechnik GmbH carry the label "made in Germany.

well educated and motivated

Every employee is well educated and motivated. The basic requirement is a high level of individual responsibility and a pleasant working atmosphere with a social structure. Every employee of AHLBORN Mess- und Regelungstechnik GmbH receives a participating share in the company's profits.

evolution of measuring technology

Since more than 20 years we use intelligent connecting plugs for sensors. This means that one single measurement instrument is able to operate completely different applications – just the sensor needs to be exchanged. By doing so, no extensive programming is necessary. The measurement operation can start right after connecting the respective sensor.

DAkkS - Calibration laboratory D-K-19342-01-00

For being able to offer a close to complete calibration range for all measured quantities that can be acquired by the ALMEMO® measuring technology, we maintain a calibration laboratory. Concerning the measured quantities air temperature, air humidity, wind speed and electrical sizes we are ACCREDITED ACCORDING TO standard DIN EN ISO/IEC 17025:2018.